Digitus CAT7 S-FTP (LS0H) Subterranean Network Installation Cable (per meter)
The Digitus® Professional Cat.7 S/FTP burial installation cable is characterized the following cable construction:
- Category 7 cables are made of 4 of high-performance twisted pair conductors. The cable standard provides performance of up to 1200MHz and is used for Ethernet networks running at speeds up to 10 Gigabit. (AWG 23)
-
S-FTP: Shielded Foiled Twisted Pair – S-FTP cables consist of pairs of wires twisted together with a layer of foil wrapped around the individual twisted pairs, and an additional overall braid screen covering the 4 pairs of foiled twisted wires. This provides a maximum level of protection against electromagnetic and radio-frequency interference and crosstalk.
-
LS0H: Low smoke zero halogen – LS0H is a material standard for cable jacketing which emits limited smoke and no halogen when exposed to high sources of heat. (LS0H is also known as LSZH, LSOH, LSFH or OHLS.) This cables inner jacket and conforms to the following standards: IEC 60332-1, FRNC-B, LSZH-1 and CPR Euro class Eca, ISO/IEC 11801, DIN EN 50173, DIN EN 50288-4-1.
-
This cable is suitable for installations in dry or wet areas, outdoor or ground.
-
Permanent link certified
- PoE Power over Ethernet support
| Physical properties | Basic conductor | Solid AWG 23/1, bare annealed copper 0.57 mm nominal |
| Insulation | SFS-PO | |
| Total number of insulated conductors | 8, twisted in 4 pairs | |
| Color code | Blue-white, orange-white, green-white, brown-white | |
| Individual pair shielding | Aluminum foil, providing 100 % coverage | |
| Overall shielding | Copper wire braid | |
| Outer jacket | PE, diameter 0.5mm nominal | |
| Color | Black (RAL 9005) | |
| Mechanical properties | Tensile loading | 150N max. |
| Dynamic bending radius | 8x AD mm min. | |
| Static bending radius | 4x AD mm min. | |
| Shipping- and storage temperature range | -20 °C up to +60 °C | |
| Operating temperature range | -50 °C up to +60 °C | |
| Installation temperature range | 0 °C up to +60 °C | |
| Overall diameter | 8.5 mm nom. | |
| Weight | 66.5 kg/km | |
| Electrical properties | Mean impedance | 100±5 Ohm @ 1-600 MHz |
| Capacitance | 40 pF/m nominal @ 1 KHz | |
| Capacitance unbalance (pair-ground) | 1.6 pF/m max. @ 1 KHz | |
| Insulation resistance | 5 GOhm x km min | |
| Caloric value | 650MJ/m | |
| DC loop resistance | 147 Ohm/km max. (2% max. resistance unbalance) | |
| Voltage resistance | 72 Vdc max. | |
| Coupling attenuation | 80 dB | |
| Signal propagation delay | 450 nS/100 m max. | |
| Delay difference | 15 nS/100 m max. | |
| Separating class | “d” acc. to EN 50174-2 | |
| NVP | 79% | |
| Conductor material | Cu, bare | |
| Diameter conductor | 0.57 mm | |
| Nominal cross section conductor | 0.2552 mm² | |
| AWG-size | 23 | |
| Conductor category | Class 1 = solid | |
| Number of cores | 1 | |
| Stranding element | Pairs | |
| Core insulation | Foam-Skin-PE | |
| Core identification | Colour | |
| Screen over stranding element | Foil | |
| Screen over stranding | Braiding | |
| Halogen free (acc. EN 60754-1/2) | Yes | |
| Flame retardant | In accordance with EN 60332-1-2 | |
| Low smoke (acc. EN 61034-2) | Yes | |
| Category | 7 | |
| NVP value | 79% |
| Colour | Black |
|---|---|
| Type | CAT 7 |
| Length | Per Meter |
| Shielding | S-FTP |
| Conductor | Bare Copper |
| Outdoor | Yes |
Featured Products
